Template:Infobox Australian place/doc

From World Samba
Revision as of 18:14, 4 March 2017 by Admin (talk | contribs) (1 revision imported)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Template:Esoteric


Template:Infobox Australian place/pagelinks

Purpose

{{Infobox Australian place}} is used to add infoboxes to articles on places in Australian states and territories. It is not limited to populated places such as cities, towns and suburbs, but may be used on any place including regions, local government areas, cadastral units, protected areas and even some areas that do not fall into any of the preceding descriptions and for which no other infobox is appropriate. It is the standard infobox used in Australian articles. Australian articles using {{Infobox settlement}} should be converted to use this infobox.

The infobox been extensively customised for Australia and includes automation that results in some parameters being redundant to other parameters. For example, when the location map function is used, it is not necessary to specify coordinates as the coordinate string is automatically generated during creation of the locator map. Similarly, if a population density (in the density field) is not specified, this will be automatically generated based on the pop and area fields. It is therefore important to read parameter descriptions thoroughly, to avoid unnecessarily providing redundant, or incorrect information.

Usage

To use this template

  1. Copy the relevant blank template from the Blank infobox page into the beginning of your document, remembering to put the code at the very top of the article and the first word of the article on the very next line.
  2. Enter values for the fields as outlined in the table below. Fields left blank will automatically be hidden.
  3. Preview.
  4. Save the page with an appropriate edit summary.

Examples

Parameters

Both type and state are required parameters. All other parameters used by this template are optional. The following are available:

Parameter Description Valid for
blank = all
Source/notes Values
Template:Visible anchor infobox type Sets up the template for a specific type of locality. Should be set to other when the place is not one of the defined types. "city", "suburb", "town", "lga", "region", "cadastral", "protected" or "other"
name name of place If this field does not exist, the template will use the name of the article. If the field exists, but the place name is not defined, the infobox title will be blank. plain text
city city name suburb See List of cities in Australia.In some cases it may be desirable to include the name of a non-city here. In any case, if the name is not wikilinked, it will automatically be linked. plain text, may be linked.
Template:Visible anchor state abbreviation Abbreviation for the state. For consistency, lower case is preferred, but upper case may be used. When a state code is not applicable, "au" should be used, although the field may be left blank. "qld", "nsw", "act", "vic", "tas", "sa", "wa", "nt", or use "au" for Australia – plain text, do not link
iucn_category IUCN category protected area This field should be populated with the IUCN category associated with the protected area. Although optional, use of this field is strongly recommended. For more information on how this field is displayed, see IUCN Categories below. Ia, Ib, II, III, IV, V, or VI
(plain text, do not wikilink)
image generic image of the locality For cadastral units, this is typically a map showing the location of the cadastral unit within the state or territory. filename
image_upright width of generic image of the locality This is an optional field. If not specified, the image width will default to |upright=1.23, which is approximately 270px if the default thumbnail size has not been changed at Special:Preferences) The size should not be set to a value that would result in an image width greater than 300px. See help below for guidance on determining the value to be used. number
caption caption for the locality image wikitext (can contain links)
image_alt Alt text for the image wikitext (can contain links)
image2 A second image of the locality In LGA articles this is typically used where a map of the LGA is required but the appropriate locator map template is not available in Category:Australia location map templates. filename
image2_upright width of the second image of the locality This is an optional field. If not specified, the image width will default to |upright=1.23, which is approximately 270px if the default thumbnail size has not been changed at Special:Preferences) The size should not be set to a value that would result in an image width greater than 300px. See help below for guidance on determining the value to be used. number
caption2 caption for the second locality image wikitext (can contain links)
image2_alt Alt text for the image wikitext (can contain links)
coordinates coordinates of the locality Template:UF-coord
If the locator map function is being used, this may be omitted, as the template generates the {{coord}} string from the locator map parameters, in which case this field is overridden.
Example:
{{Coord|32|45|41.3|S|151|44|38.6|E|type:city_region:AU-NSW|display=inline,title}}
coord_type coordinates type override If the locator map is being used and the infobox is not being used for one of the standard types (city, suburb, town, lga, region, cadastral, protected), this field must be used to override the default type:city or type:landmark generated by the infobox.
May include scale:, dim:, source:, joined by underscores ("_").
For valid inputs see type:, scale:, dim:, source:.
Example: | coord_type=city_dim:100km
map_scale changes scale of map The scale of the map linked to in the generated coordinates string can be changed from the default by setting this field. unformatted number. See {{coord}} for examples.
latd
latm
lats
latitude coordinates field degrees
minutes
seconds (optional for region and lga)
longd
longm
longs
longitude coordinates field degrees
minutes
seconds (optional for region and lga)
alternative_location_map forces locator map Forces the locator map to use an alternative, rather than the state map, regardless of the contents of state. Name of the alternative map
force_national_map forces locator map city, region, protected Forces the locator map to use the Australian, rather than the state map, regardless of the contents of state. "yes" or leave blank, plain text, do not link
use_lga_map forces locator map suburb, lga, protected Forces the locator map to use the lga map. For this to work, both state and lga must be set to the correct parameters. "yes" or leave blank, plain text, do not link
relief forces relief map "yes" or leave blank, plain text, do not link
pushpin_map_caption caption optional, plain text or linked
pushpin_label_position label position left, right, top, bottom
default: left
map_alt Alt text for the location map wikitext (can contain links)
nearest_town_or_city nearest town or city to the area protected If the area is not within a town or city, the nearest town or city to the area can be listed here. If only one, wikilinking may be omitted as the article will be automatically linked. If there are more than one, use {{Plainlist}}. wikitext (can contain links)
pop population all except protected; use approx for region ABS (generic)
2011 Census QuickStats
Do not add anything else to this field (years, references etc.)
number. should be plain, either with or without a comma. i.e. 12345 or 12,345
pop_year population year all except protected; use approx for region Year applicable to the population figure number
When the population is for a census year, use {{CensusAU}}
pop_footnotes population footnote for references all except protected; use approx for region ABS (generic)
2011 Census QuickStats
wikitext (can contain links)
Best when used with <ref> </ref> tags and {{Census 2011 AUS}}
pop2 2nd population figure all except protected; use approx for region ABS (generic)
2011 Census QuickStats
Do not add anything else to this field (years, references etc.)
In some articles it may be necessary to provide a second population figure. (see Clarence Town, New South Wales for an example) Use pop2, pop2_year and pop2_footnotes for the second figure.
number. should be plain, either with or without a comma. i.e. 12345 or 12,345
pop2_year 2nd population year all except protected; use approx for region Year applicable to the population figure number
When the population is for a census year, use {{CensusAU}}
pop2_footnotes population footnote for pop2 references all except protected; use approx for region ABS (generic)
2011 Census QuickStats
wikitext (can contain links)
Best when used with <ref> </ref> tags and {{Census 2011 AUS}}
poprank population rank city Used with pop
List of cities in Australia by population
number
density population density city, region ABS unformatted number (people/km²)
density_footnotes population density footnote for references city, region ABS wikitext (can contain links)
Best when used with <ref> </ref> tags and {{cite web}}
established established Date the location was established. If the exact date is unknown, a year will suffice date
established_footnotes reference(s) for establishment date wikitext (can contain links)
Best when used with <ref> </ref> tags and {{cite web}}
abolished abolished Date the location was abolished. If the exact date is unknown, a year will suffice date
gazetted Date the place name was gazetted date
postcode suburb, town Australia Post postcode search tool number
elevation measured from sea level in metres suburb, town fallingrain.com unformatted number (m)
elevation_footnotes elevation footnote for references suburb, town fallingrain.com wikitext (can contain links)
Best when used with <ref> </ref> tags and {{cite web}}
area ABS unformatted number (km2)
area_footnotes area footnote for references ABS wikitext (can contain links)
Best when used with <ref> </ref> tags and {{cite web}}
timezone timezone city, suburb, town, lga, region See Time in Australia plain text, link
utc utc offset city, suburb, town, lga, region "+" followed by number
timezone-dst summer timezone city, suburb, town, lga, region See Time in Australia plain text, link
utc-dst summer utc offset city, suburb, town, lga, region "+" followed by number
mayor Mayor of LGA lga Name of the mayor only. Do not include titles, postnominals or political party information. plain text
mayortitle Title of the mayor lga Wiki text. If omitted (but mayor is provided), defaults to "Mayor". Otherwise likely to be "Lord Mayor", "President" or "Chairman" (etc.). The text can include a link to a list of mayors etc.
dist# See Notes below city, suburb, town (other cities) Distance by road, not direct – travelmate.com.au, maps, Google earth, whereis (get directions), Route planner – Victoria, Australia unformatted number (km)
dir# See Notes below city, suburb, town (other cities) plain text, normally "N", "S", "E", "W", "NE", "SW", "SSE", "WNW" etc, or "north", "south" (lower case, per MOS:COMPASS) etc
location# See Notes below city, suburb, town maps, Google earth plain text, may be wikilinked, automatically links the name
lga local government area city, suburb, town Name of the local government area
NSW Geographical Names Board (NSW only)
plain text, may be wikilinked, automatically links the name
lga2-lga5 2nd–5th LGAs city, suburb, town If more than 5 LGAs are required, use {{plainlist}} as necessary. See Hunter Region for an example. plain text, link
seat LGA seat lga plain text, link
region Name of region location is in city, suburb, town, lga, cadastral, protected plain text, link
county lands administrative division (not in all areas) city, suburb, town, lga Lands administrative divisions of Australia
NSW Geographical Names Board (NSW only)
plain text, link
parish NSW, Qld, Vic only city, suburb, town Lands administrative divisions of Australia
NSW Geographical Names Board (NSW only)
plain text
hundred lands administrative division (not in all areas) cadastral plain text, link
former_hundred lands administrative division (not in all areas) cadastral plain text, link
division lands administrative division (NSW only) cadastral Lands administrative divisions of New South Wales plain text, link
stategov state government electorates city, suburb, town, lga, region plain text, link
stategov2-stategov5 2nd–5th state government electorates city, suburb, town, lga, region plain text, link
fedgov federal government electorates city, suburb, town, lga, region plain text, link
fedgov2-fedgov4 2nd–4th federal government electorates city, suburb, town, lga, region plain text, link
logo Logo of LGA lga Individual LGA website image link
logo_upright width of LGA logo lga This is an optional field. If not specified, the image width will default to |upright=0.8, which is approximately 176px if the default thumbnail size has not been changed at Special:Preferences) See help below for guidance on determining the value to be used. number
visitation_num number of visitors protected The number of visitors in a recent year if known. unformatted number, will be formatted automatically
visitation_year year of visitation_num protected The year during which the number of visitors was counted raw year
plain text, do not wikilink
visitation_footnotes reference(s) for visitation figure and year protected wikitext (can contain links)
Best when used with <ref> </ref> tags and {{cite web}}
managing_authorities authority that manages the area protected Name of the authority or organisation that manages the area. wikitext (can contain links). If an unpiped link is to be used, wikilinking may be excluded as an existing article will be wikilinked automatically.
url website address lga, protected Individual website for the LGA or protected area
(Do not use for former LGAs)
bare url. e.g. http://www.example.com
maxtemp max average annual temperature suburb, town Bureau of Meteorology number (°C)
maxtemp_footnotes footnote for references suburb, town Bureau of Meteorology wikitext (can contain links)
Best when used with <ref> </ref> tags and {{cite web}}
mintemp min average annual temperature suburb, town Bureau of Meteorology number (°C)
mintemp_footnotes footnote for references suburb, town Bureau of Meteorology wikitext (can contain links)
Best when used with <ref> </ref> tags and {{cite web}}
rainfall average annual rainfall suburb, town Bureau of Meteorology unformatted number (mm)
rainfall_footnotes footnote for references suburb, town Bureau of Meteorology wikitext (can contain links)
Best when used with <ref> </ref> tags and {{cite web}}
near-n/ne/e/se/s/sw/w/nw neighbours (suburb, lga) suburb, lga Only places that share borders with the subject place should be included in these fields. plain text, link
near Central to neighbours suburb, lga replaces name (best used without any near-* e.g. to specify a #link to the main text for further info) plain text, link
footnotes general footnotes Additional footnotes for fields that do not have their own field for footnotes wikitext (can contain links)
Best when used with <ref> </ref> tags.
_noautocat auto categorisation In a very limited number of cases, the automatic categorisation built into this template may cause anomalies. In such cases, this parameter may be used to prevent automatic categorisation. However, it should only be used when absolutely necessary. When it is used, a hidden note should be included to explain why the parameter is being used in the article. "yes" to not categorise, or
leave blank to categorise

Notes

Type

The infobox type affects the colour of the top bar of the infobox.

Colour[lower-alpha 1] |type=
Light Goldenrod Yellow city
Antique White suburb
Snow Flurry (greenish) town
Lavender lga
Mauve region
Light Yellow cadastral
No colour protected
No colour "other"
Very Light Grey Undefined
  1. Colour names per this site

IUCN Categories for protected areas

Depending on the value of the iucn_category parameter, one of the following banners will be displayed below the name. Valid values are Ia, Ib, II, III, IV, V and VI. For more information read the IUCN protected area categories article. If you cannot find the correct code in a reliable source, leave blank.

Template:IUCN banner
Template:IUCN banner
Template:IUCN banner
Template:IUCN banner
Template:IUCN banner
Template:IUCN banner
Template:IUCN banner

<section begin=image_upright />

Calculating "image_upright"

The image_upright parameter, and image2_upright and logo_upright where applicable, is/are provided so as to facilitate the use of scalable images in this infobox, in accordance with the instructions at WP:IMAGESIZE, which advises against the use of px (e.g. thumb|300px), as this forces a fixed image width. Scalable images respect the user's base preference (which may have been selected for that user's particular devices). Module:InfoboxImage, which is used in this infobox, accommodates the use of scaling. However, setting the appropriate scale is slightly more complex than setting a raw "px" value. This guide provides a quick conversion table to make the process of setting a scale easier. It is based on a default thumbnail setting of 220px (size is default multiplied by upright value then rounded to nearest 10).

"px" setting image_upright=
170 0.75
180 0.8
190 0.85
200 0.9
210 0.95
220 1
230 1.05
240 1.1
250 1.15
260 1.2
270 1.23
280 1.25
290 1.3
300 1.35
<section end=image_upright />

Footnotes fields

Any references should be placed within the respective "_footnotes" field and not within the field reserved solely for a numeric value. For example, place the reference used for the area of City X in the parameter {{{area_footnotes}}} and not in the {{{area}}} parameter. Otherwise, an error may result.

Unformatted numbers and expression errors

Certain fields require numeric values to be entered in an unformatted/raw fashion—i.e. 1000.0 not 1,000.0. If an expression error is present, simply remove any commas or spaces from the number.

Dist#, Dir# and Location#

This is the distance and approximate direction from another location. The '#' is replaced with a number between 1 and 5. Therefore, distances for up to five locations can be listed using the range 'dist1' – 'dist5'. Direction from the locations can be specified using 'dir1' – 'dir5' and the locations can be listed as 'location1' – 'location5'. Each dist# must be partnered with an appropriate location#. Dir# is optional.

Where to find information

Tracking categories

Deprecated fields

Errors

Temporary

Subpages

Template:Infobox Australian place
Template:Infobox Australian place/Blank
Template:Infobox Australian place/Examples
Template:Infobox Australian place/doc
Template:Infobox Australian place/sandbox
Template:Infobox Australian place/sandbox/doc
Template:Infobox Australian place/testcases

Microformat

Template:UF-hcard-geo

TemplateData

This is the TemplateData documentation for this template used by VisualEditor and other tools.

See the monthly error report for this template.

TemplateData for Infobox Australian place/doc

Display information about a place in Australia in a standard infobox format.

Template parameters

This template prefers block formatting of parameters.

ParameterDescriptionTypeStatus
Typetype

The type of place, which determines the look of the infobox. Can be empty or one of the following: 'city', 'suburb', 'town', 'lga', 'region', or 'cadastral'.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Namename

The name of the place. If this parameter is left empty, the infobox title will be blank, while if this parameter is not called at all, it defaults to the name of the article.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Citycity

The name of the city the place is located in, which is automatically wikilinked.

Default
empty
Example
empty
Auto value
empty
Stringoptional
State Abbreviationstate

The abbreviation for the state the place in located in, which can be uppercase or lowercase.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Imageimage

A filename for a generic image of the locality.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Image Widthimage_upright

Override the default width of the image, scalable.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Captioncaption

A caption for the image.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Image Alt Textimage_alt

Alt text for the image.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Image 2image2

A filename for a second image of the locality. Usually used for maps, especially in LGA articles.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Image 2 Widthimage2_upright

Override the default width of the second image, scalable.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Image 2 Captioncaption2

A caption for the second image.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Image 2 Alt Textimage2_alt

Alt text for the second image.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Coordinatescoordinates

Coordinates of the locality. Use {{coord}} with 'display=inlines,title' if not using the locator map function. Please don't be overly precise.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Coordinates Typecoord_type

Override the coordinates type parameter when using the locator map and this is not one of the standard place types.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Latitude (Degrees)latd

The latitude of the place, degrees part. Can be negative.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Latitude (Minutes)latm

The latitude of the place, minutes part. Can be negative.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Latitude (Seconds)lats

The latitude of the place, seconds part. Can be negative.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Longitude (Degrees)longd

The longitude of the place, degrees part. Can be negative.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Longitude (Minutes)longm

The longitude of the place, minutes part. Can be negative.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Longitude (Seconds)longs

The longitude of the place, seconds part. Can be negative.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Alternative Location Mapalternative_location_map

Forces the locator map to use this alternative map instead of the default state map.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Force National Mapforce_national_map

Set to 'yes' or leave this parameter blank to force the locator map to use the Australian map instead of the default state map.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Force LGA Mapuse_lga_map

Set to 'yes' or leave this parameter blank to force the locator map to use the LGA map instead of the default state one.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Relief Maprelief

Set to 'yes' or leave this parameter blank to make the locator map use a relief map.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Pushpin Map Captionpushpin_map_caption

The caption for the locator map's pushpin. Defaults to the place name.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Pushpin Label Positionpushpin_label_position

Where the caption should appear relative to the locator map's pushpin. Can be one of the following: 'left', 'right', 'top', or 'bottom'.

Default
right
Example
empty
Auto value
empty
Stringoptional
Locator Map Alt Textmap_alt

Alt text for the locator map.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Populationpop

The total population of the place.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Population Yearpop_year

The year in which the population measurement was taken. {{CensusAU}} may be used.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Population Footnotespop_footnotes

Footnotes for the population figure. Please use references here.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Population 2pop2

A second total population measurement.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Population 2 Yearpop2_year

The year in which the second population measurement was taken. {{CensusAU}} may be used.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Population 2 Footnotespop2_footnotes

Footnotes for the second population figure. Please use references here.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Population Rankpoprank

Only for cities. The total population rank of the city.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Population Densitydensity

The population density of the place.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Population Density Footnotesdensity_footnotes

Footnotes for the population density figure. Please use references here.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Establishedestablishedest

The date the place was established.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Abolishedabolished

The date the place was abolished.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Gazettedgazetted

The date the place was gazetted.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Postcodepostcode

The postcode of the place.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Elevationelevation

Elevation of the place above sea level in metres.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Elevation Footnoteselevation_footnotes

Footnotes for the elevation figure.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Areaarea

Area of the place in square kilometres.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Area Footnotesarea_footnotes

Footnotes for the area figure.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Time Zonetimezone

The time zone the place is located in.

Default
empty
Example
empty
Auto value
empty
Stringoptional
UTC Timeutc

The difference between UTC time and the time zone the place resides in, in the format '+' followed by a number.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Summer Time Zone (DST)timezone-dst

The summer time zone the place is located in.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Summer UTC Time (DST)utc-dst

The difference between UTC time and the time zone the place resides in in the summer, in the format '+' followed by a number.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Mayormayor

LGA only. The name of the mayor of the LGA.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Mayor Titlemayortitle

LGA only. The title of the mayor of the LGA. Defaults to 'Mayor'.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Distance 1dist1

The distance by road in kilometres from location 1 to the place.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Direction 1dir1

The compass direction from location 1 to the place. Examples are 'NW', 'E', and 'SSE'.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Location 1location1

Another location to compare with this one.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Distance 2dist2

The distance by road in kilometres from location 2 to the place.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Direction 2dir2

The compass direction from location 2 to the place. Examples are 'NW', 'E', and 'SSE'.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Location 2location2

Another location to compare with this one.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Distance 3dist3

The distance by road in kilometres from location 3 to the place.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Direction 3dir3

The compass direction from location 3 to the place. Examples are 'NW', 'E', and 'SSE'.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Location 3location3

Another location to compare with this one.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Distance 4dist4

The distance by road in kilometres from location 4 to the place.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Direction 4dir4

The compass direction from location 4 to the place. Examples are 'NW', 'E', and 'SSE'.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Location 4location4

Another location to compare with this one.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Distance 5dist5

The distance by road in kilometres from location 5 to the place.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Direction 5dir5

The compass direction from location 5 to the place. Examples are 'NW', 'E', and 'SSE'.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Location 5location5

Another location to compare with this one.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Local Government Area (LGA)lga

The name of the local government area of the place.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Local Government Area (LGA) 2lga2

Another local government area of the place.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Local Government Area (LGA) 3lga3

Another local government area of the place.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Local Government Area (LGA) 4lga4

Another local government area of the place.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Local Government Area (LGA) 5lga5

Another local government area of the place.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Local Government Area (LGA) Seatseat

The local government area's seat of government.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Regionregion

The region the LGA is in.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Countycounty

The county the place is in.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Parishparish

The parish the place is in.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Hundredhundred

The hundred the place is in.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Former Hundredformer_hundred

The former hundred the place is in.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Divisiondivision

The division the place is in.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Local Governmentlocalgov

The local government electorate of the place.

Default
empty
Example
empty
Auto value
empty
Stringoptional
State Governmentstategov

The state government electorate of the place.

Default
empty
Example
empty
Auto value
empty
Stringoptional
State Government 2stategov2

Another state government electorate of the place.

Default
empty
Example
empty
Auto value
empty
Stringoptional
State Government 3stategov3

Another state government electorate of the place.

Default
empty
Example
empty
Auto value
empty
Stringoptional
State Government 4stategov4

Another state government electorate of the place.

Default
empty
Example
empty
Auto value
empty
Stringoptional
State Government 5stategov5

Another state government electorate of the place.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Federal Governmentfedgov

The federal government electorate of the place.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Federal Government 2fedgov2

Another federal government electorate of the place.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Federal Government 3fedgov3

Another federal government electorate of the place.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Federal Government 4fedgov4

Another federal government electorate of the place.

Default
empty
Example
empty
Auto value
empty
Stringoptional
LGA Logologo

A filename for the logo, if any, of the place's LGA.

Default
empty
Example
empty
Auto value
empty
Stringoptional
LGA Logo Sizelogosize

Override the default width of the LGA logo, which is 175px.

Default
empty
Example
empty
Auto value
empty
Numberoptional
LGA URLurl

The bare URL for the place's LGA's website.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Maximum Temperaturemaxtemp

The maximum average annual temperature of the place in degrees Celsius.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Maximum Temperature Footnotesmaxtemp_footnotes

Footnotes for the maximum temperature figure. Please use references here.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Minimum Temperaturemintemp

The minimum average annual temperature of the place in degrees Celsius.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Minimum Temperature Footnotesmintemp_footnotes

Footnotes for the minimum temperature figure. Please use references here.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Rainfallrainfall

The average annual rainfall of the place in millimetres.

Default
empty
Example
empty
Auto value
empty
Numberoptional
Rainfall Footnotesrainfall_footnotes

Footnotes for the rainfall figure.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Central Near Gridnear

Replace the default text in the center of the 'Near' grid (the name of the place).

Default
empty
Example
empty
Auto value
empty
Stringoptional
North Near Gridnear-n

The nearest neighbour of the place to the north.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Northeast Near Gridnear-ne

The nearest neighbour of the place to the northeast.

Default
empty
Example
empty
Auto value
empty
Stringoptional
East Near Gridnear-e

The nearest neighbour of the place to the east.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Southeast Near Gridnear-se

The nearest neighbour of the place to the southeast.

Default
empty
Example
empty
Auto value
empty
Stringoptional
South Near Gridnear-s

The nearest neighbour of the place to the south.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Southwest Near Gridnear-sw

The nearest neighbour of the place to the southwest.

Default
empty
Example
empty
Auto value
empty
Stringoptional
West Near Gridnear-w

The nearest neighbour of the place to the west.

Default
empty
Example
empty
Auto value
empty
Stringoptional
Northwest Near Gridnear-nw

The nearest neighbour of the place to the northwest.

Default
empty
Example
empty
Auto value
empty
Stringoptional